TRITON MATERIALS

 · Plaster Delay-Set slows down the set of pool plasters
· It does not weaken the plaster
· It does not contain chlorides, nitrites, nitrates, clay or other materials that may be hazardous to your workers or harmful to the plaster
· It does not discolor plaster		 · English and Spanish usage directions on every bag
· Very easy to store and ship
· Easy and safe to handle by workers
· Plaster Delay-Set is packaged in a patented water-soluble inner bag for convenient use at the job site

Plaster Delay-Set is a dry powdered set admixture packaged in a patented, ready-to-use, water soluble bag. Plaster Delay-Set is designed to slow down the set of plaster. It is invaluable in hot weather or when you have a shortage of workers, when you often need more time to work the plaster before it sets.

It will not discolor the plaster, it is very predictable in its use, and will not weaken the final strength of the plaster..

Used as directed, one bag will retard the set of plaster for about one hour, depending on temperature. Up to three bags may be used.

Contains no chlorides, nitrites, nitrates or clay.

1. Determine the amount of Plaster Delay-Set required. See Recommended Dosage Rate.
2. Prepare pool plaster mix using all ingredients, including water. Begin mechanical mixing before adding Plaster Delay-Set.
3. Remove the protective outer bag, place the inner water-soluble bag and contents in the mixer.
4. Continue mixing for at least 5 minutes for complete dispersion of Plaster Delay-Set throughout the mix.

  • When blending plaster at the job site: Use one 10-oz. (284 g) bag of Plaster Delay-Set for every four sacks of cement in the mix for a 1-hour set retardation.
  • When using pre-blended plaster: Use one bag of Plaster Delay-Set for every 1000 lbs. of plaster mix for a 1-hour set retardation. If more delay is needed, up to three bags may be used.
  • As an additive in the manufacture of dry plaster blends: Use 2.66 oz./cwt of cement for every 1-hour of set retardation.

10 oz./284 gram water soluble bag, 40 bags per case (item #95450)
50 lb. paper bags available for addition to pre-packaged dry mixes (item #95451)

Plaster Delay-Set is compatible with all concrete admixtures. When used with other admixtures, each one must be dispensed separately into the mix